Tag Archives: Grub

GRUB shows Windows 7 instead of Windows 10

source: link

author: david6

After installing Windows 10, every time I get a kernel update or I run the update-grub2 it always shows Windows 7 instead of Windows 10. How do I fix this permanently?

The reason why it still shows Windows 7 instead of Windows 10 is that the file /usr/lib/os-probes/mounted/20microsoft does not contain the label for Windows 10, so during the os-prober detection of the OS it falls back to Windows 7.

To correct this, you need to make the following changes to the /usr/lib/os-probes/mounted/20microsoft file:

NOTE: Always make a backup of the file before modifying it!

if item_in_dir -q bootmgr "$2"; then
        # there might be different boot directories in different case as:
        # boot Boot BOOT
        for boot in $(item_in_dir boot "$2"); do
                bcd=$(item_in_dir bcd "$2/$boot")
                if [ -n "$bcd" ]; then
                        if grep -qs "W.i.n.d.o.w.s. .1.0" "$2/$boot/$bcd"; then
                                long="Windows 10 (loader)"
                        elif grep -qs "W.i.n.d.o.w.s. .8" "$2/$boot/$bcd"; then
                                long="Windows 8 (loader)"
                        elif grep -qs "W.i.n.d.o.w.s. .7" "$2/$boot/$bcd"; then
                                long="Windows 7 (loader)"

the changes above are changing the line if grep -qs "W.i.n.d.o.w.s. .8" "$2/$boot/$bcd"; then to elif grep -qs "W.i.n.d.o.w.s. .8" "$2/$boot/$bcd"; then, and adding if grep -qs "W.i.n.d.o.w.s. .1.0" "$2/$boot/$bcd"; then and long="Windows 10 (loader)" above that line and saving it.

Once saved, then running os-prober now looks like this:

terrance@terrance-ubuntu:~$ sudo os-prober
[sudo] password for terrance: 
/dev/sdf1:Windows 10 (loader):Windows:chain

then running update-grub2 it will now make the updates to your /boot/grub/grub.cfgpermanent anytime you get a kernel update so it will show the correct version of Windows now (example below):

terrance@terrance-ubuntu:~$ sudo update-grub
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-3.19.0-26-generic
Found initrd image: /boot/initrd.img-3.19.0-26-generic
Found linux image: /boot/vmlinuz-3.13.0-58-generic
Found initrd image: /boot/initrd.img-3.13.0-58-generic
Found linux image: /boot/vmlinuz-3.13.0-57-generic
Found initrd image: /boot/initrd.img-3.13.0-57-generic
Found memtest86+ image: /boot/memtest86+.elf
Found memtest86+ image: /boot/memtest86+.bin
Found Windows 10 (loader) on /dev/sdf1
done

Hope this helps!

Advertisements

Change your Grub options with Grub Customizer

by  @ http://linuxaria.com

Edit the menu of grub is not the easiest thing to do, and if you do some mistakes there is the risk that you are not able anymore to boot into your Linux, for these reasons it’s usually suggested to use some tool to edit grub configurations, today I’ll show you Grub Customizer.

Grub Customizer is a graphical settings manager for GRUB2 and BURG that allows anyone to easily set the boot options.

Disclaimer: Grub Customizer should be a stable application, but you should be very careful when using it and be sure to know what you’re doing!
Messing with GRUB2/BURG can cause the system not to boot!

Continue reading Change your Grub options with Grub Customizer